Application Instructions - WEG CLIC-02 Manual Del Usuario

7.4 APPLICATION INSTRUCTIONS

Timer
Counter
Addition-Subtraction
Multiplication-Division
RTC
Comparator
HMI
Datalink(1)
Modbus Master(1)
PID
Data Multiplexer
Analog Ramp
Data Register
Shift
PWM(2)
(1) Available only for models with communication port RS-485;
(2) Available only for models with transistor output.
The timers, counters, RTC functions and comparators have variations in their operation
modes, selected by the function mode. When these instructions are selected to mode 0,
they can be used as internal markers M.
7.4.1 Timer
CLIC-02 has 31 timers. Each timer can operate in 8 modes: 1 mode for pulse timer and 7
modes for general purpose timer. The timers are addressed by T mnemonic, varying from
T01 ~ T1F. Timers T0E and T0F work as retentive (maintain their value after large energy
loss) if the option "M retentive" is active. All other timers are not retentive. Each timer has
6 parameters for own configuration. The table below describes each timer configuration
parameter.
Symbol Quantity
T 31
C 31
AS 31
MD 31
R 31
G 31
H 31
L 8
MU 15
PI 15
MX 15
AR 15
DR 240
S 1
P 2
- English -
Ladder Logic Programming
Valid Range
T01 ~ T1F
C01 ~ C1F
AS01 ~ AS1F
MD01 ~ MD1F
R01 ~ R1F
G01 ~ G1F
H01 ~ H1F
L01 ~ L08
MU01 ~ MU0F
PI01 ~ PI0F
MX01 ~ MX0F
AR01 ~ AR0F
DR01 ~ DRF0
S01
P01 ~ P02
CLIC-02 | 75