WEG CLIC-02 Manual Del Usuario página 98

Ladder Logic Programming
7.4.5 HMI Function
HMI function allows displaying personalized screens through CLIC-02 LCD display, which
has 4 lines and 16 characters each. CLIC-02 has 31 display functions on the MMI enabled
by coils H01 ~ H1F. The screens are configured by CLIC-02 programming software, through
the Edit >> HMI/Text menu, allowing to insert texts, current function values, programmed
function values, digital variable status and fields for parameter changes of the used functions
in the program. For further information on programming and screen display, see Chapter 3
– Programming tool.
The HMI function has the following configuration parameters:

①

②
On CLIC-02 display or in the programming tool, the RTC block Mode 3 is displayed this way:
On CLIC-02 main screen press key 'SEL' to view the enabled screens. Use directional
arrows ↑ and ↓ to toggle between screens.
98 | CLIC-02
Symbol
Function number: H01 ~ H1F

Display mode:

②

- English -
Description
1  Display
2  Do not display
①
