WEG CLIC-02 Manual Del Usuario página 48

Programming Tool
Transferring the program to CLIC-02 and keeping input l01 on, the function H01 will be
enabled, displaying the screen H01 on the CLIC-02 display.
Another way to display the programmed screen s is by pressing key "SEL", the screens
set for view (mode selection = 1) will be displayed, in priority order from H01 to H1F. The
screen will be display the following way:
Press the directional keys "↑" or "↓" to navigate between enabled screens (mode
„
selection = 1)
Press "SEL" to enable adjustment of the T01 value. The adjustment value may be
„
increased/decreased through keys "↑" or " ↓ ". The "OK" key confirms the adjustment
and updates the pre-selected value for T01 (In this example, 050.0 may be updated, the
possibility of adjustment of T01 depends on the Field added on the HMI screen)
48 | CLIC-02 - English -