Backlight - WEG CLIC-02 Manual Del Usuario

(2) WRITE: saves the RAM program in the PM05 (3rd) memory card
(3) READ: Reads the program from PM05 or PM05 (3
To the items (1) ~ (3):
↑ ↓
Moves cursor
OK Executes the command
ESC Returns to Main Menu
6.4.7 Config. (system configuration)
Contents
CONFIG. ID 01
REMOTE I/O N

BACKLIGHT


√
M RETENTIVE
I/O NUMBER 0
√
I/O ALARM
C Retentive

CONFIG. Z

CONFIG. V 03
COMM
DATA REG. U
- English -
Keyboard Functions and LCD Display
) to the CLIC-02 (RAM)
rd
Standard

Configuration of the ID (00~99)

Remote I/O Mode
(N: None; M: Master; S: Slave)

Backlight Mode
(√: Always on X: On for 10s, after
pressing any key)

√:Volatile; X: Not- Volatile

Configuration of the I/O expansion
module number (0~3)

Alarm configuration when the I/O
Point Expansion is not connected
(√:Yes x:No)

In the STOP/RUN change or vice-
versa, the current Counter value is
kept (√: Yes x: No)

Enables or disables the keys as
digital inputs Z01-Z04
(√: enables x: disables)

Format and
Port communication speed
configuration RS-485

Configuration type Data Register
(U: 16 bits - without sign; S: 16 bits
–with sign)
CLIC-02 | 63