WEG CLIC-02 Manual Del Usuario página 12

Safety Instructions
ATTENTION!
The smart relay CLIC-02 shall only be installed and have its wiring connected
by experienced and certified personnel.
ATTENTION!
Be sure that CLIC-02 wiring meets all applicable rules and codes, including
local and national standards and codes.
ATTENTION!
Be sure to properly dimension the cables for the current duty required.
ATTENTION!
Always separate AC wiring, DC wiring using high frequency switching, and
low power wiring.
1.3 OPERATION INSTRUCTIONS
WARNING!
In order to ensure safety in the application of CLIC-02, some complete
functional and safety tests should be performed. Only put CLIC-02 to run
after having done all tests and after safety confirmation. Any potential failure
in the application should be included in the tests. Failure in following those
items may lead to improper operation, equipment damage or, in extreme
cases, death, serious physical harm or considerable property damage.
WARNING!
When the power is on, never make contact with the terminals, conductors
or exposed electrical components. Failure in following this instruction may
lead to improper operation, equipment damage or, in extreme cases, death,
serious physical harm or considerable property damage.
ATTENTION!
It is highly recommended to add security protection, such as an emergency
stop and external interlock circuit, in case the operation of CLIC-02 needs
to be stopped immediately.
12 | CLIC-02 - English -