Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Ladder Logic Programming
7.4.13 MX Function - Multiplexer
This function transfers to the output a single value from 4 possible inputs. The transferred
value is definite by a binary combination of the selection variables. CLICK- 02 has 15 MX
instructions, seeing that each one uses 7 parameters for configuration, as shown in the
table below:
On the CLIC02 display, or in the programming tool, the MX function will be shown as follows:
The selection inputs will determine the output to be transferred, obtaining the value of the
respective input through a binary combination. The table below shows the possible input
combinations and the output results:
Selection
110 | CLIC-02
⑥
⑦
Selection
Input 1
Input 2
OFF
OFF
OFF
ON
ON
OFF
ON
ON
- English -
Symbol
Function number: MX01 ~ MX0F
Input value 1
Input value 2
Input value 3
Input value 4
Selection input 1 (most significant)
Selection input 2 (less significant)
(1) The Set-Points can be constant or current values of
any other function.
②
⑤④③
Output Result
Input Value 1
Input Value 2
Input Value 3
Input Value 4
Description
(1)
(1)
(1)
(1)
①
Publicidad
Capítulos
Tabla de contenido
