WEG CLIC-02 Manual Del Usuario página 131

(3) Counter Mode 2
Count input
Count Direction Up/Down
Reset
Parameters
Note: The sign ">" indicates that the shown current value will be greater than the preset value.
(4) Counter Mode 3
Count input
Count Direction Up/Down
Reset
Parameters
Note: PD means that the count current value will be retained during a de-energization. The system option
"Retentive C" must be enabled;
(5) Counter Mode 4
Count input
Count Direction Up/Down
Reset
Parameters
Note: The sign ">" means that the shown current value will be greater than the preset value. The count current
value will be retained during a de-energization. The system option "Retentive C" must be enabled;
(6) Counter Mode 5
Count input
Count Direction Up/Down
Reset
Parameters
Note: The sign ">" means that the shown current value will be greater than the preset value.
(7) Counter Mode 6
Count input
Contagem
Up/Down Reset
Count parameter
Note: The sign ">" means that the shown current value will be greater than the preset value. PD means that the
count current value will be retained during a de-energization. The system option "Retentive C" must be enabled;
Note: Only the first 31 counter functions can be set as retentive.
FBD screen Parameter Screen
FBD screen Parameter Screen
FBD screen Parameter Screen
FBD screen Parameter Screen
FBD screen Parameter Screen
- English -
FBD Programming
Program screen
Program screen
Program screen
Program screen
Program screen
CLIC-02 | 131