WEG CLIC-02 Manual Del Usuario página 64

Keyboard Functions and LCD Display
M RETENTIVE function maintains the current M status and the current value of T0E/T0F
„
when the CLIC-02 is restarted.
↑ ↓ ← → Moves cursor
SEL Starts edition.
OK Confirms edition
'SEL' and then Moves cursor to item 'CONFIG. ID' and item 'CONFIG. V COMM '
'←/→'
'SEL' and then 1. ID CONFIGURATION = 00~99 ; I/O NUMBER = 0~3
'↑ / ↓'
2. REMOTE I/O = N⇔M⇔S⇔N
3. BACKLIGHT; RETENTIVE C; Z ADJUSTMENT = ×⇔√
4. RETENTIVE M; I/O ALARM = √⇔×
5. CONFIG. V COMM = (0~3)(0~5)
6. DATA REG. = U⇔S
OK Confirms edition
ESC 1. Cancels edition when 'SEL' is pressed
2. Returns to main menu (saves data edition)
When the DATALINK mode is selected, the ID varies from 0~7, following the network
„
sequence
ID=0 for Master, ID =1 ~7 for Slaves.
When the REMOTE I/O mode is selected, the addressing of remote I/O is enabled as:
„
Remote Input
Remote Output
The decimal digit of CONFIG. V COMM configures the communication features of RS-485
„
and the unitary digit configures the Baud Rate of port RS-485.
For further details see Chapter 10 – Communication Functions of Port RS-485
6.4.8 RTC Config
Year.Month.Day
64 | CLIC-02
Master
←
X01~X0C
Y01~Y08 →
- English -
Slave
I01~I0C
Q01~Q08
Firmware version
Day of week; hour;
minute