WEG CLIC-02 Manual Del Usuario página 94

Ladder Logic Programming
By programming the date parameters to turn off with a date before the date to turn on, the
RTC will get the output to keep off in the declared period.
 
2010/11/11
//
// 2009/02/17
7.4.3.5 RTC Mode 4 – Adjustment with Precision in Seconds
With mode 4 selected it is possible to choose the day of the week, hour, minute and second
when the output will be activated. There are two more ways to activate the output:
If the value programmed in the field 'seconds' is between 0 and 30, the output will
„
turn on when the programmed hour and minute be reached, and will turn off when the
programmed value in the field 'seconds' be reached.
When the programmed value in the field 'seconds' is higher than 30, the output will
„
pulsate for 1 scan cycle exactly in the programmed time.
It is necessary to enable the RTC block so that the output is turned on.



 
94 | CLIC-02
Year/Month/Day Ano/Mês/Dia 2009/02/17 2009/02/17
Hora
Hour 0:00
Enabling
Habilitação
Output
Saída
Symbol


- English -
2010/11/11
0:00
Description
RTC number: R01 ~ R1F

RTC Mode: 4

Current RTC value of CLIC-02

Hour:Minute:Second
Day of week to turn output on

Hour to turn output on

Minute to turn output off

Second to turn output off

2010/11/11
0:00
0:00