Application Examples - WEG CLIC-02 Manual Del Usuario

13 APPLICATION EXAMPLES

13.1 STAIR LIGHTING CONTROL
13.1.1 Requirements
When someone goes up or down the staircase, the Light Bulbs must be energized to
„
provide lighting.
After the departure of the person, the lighting system must be turned off automatically
„
or manually in five minutes.
13.1.2 Traditional Lighting System
There are two traditional types of control:
Use of relays.
„
Use of a dedicated automatic timer.
„
Distribution box
Used components:
Switches
„
Automatic timer or relays
„
Using relays as a system controller:
The lighting keeps on while any switch is turned on.
„
Press any switch to turn the lighting off.
„
Disadvantage: The user usually forgets to turn the lighting off.
„
Using a dedicated automatic timer as a system controller
The lighting keeps on while any switch is turned on.
„
The lighting can be turned off automatically or manually in a few minutes.
„
Disadvantage: The user cannot cancel the shutdown time.
„
13.1.3 Using CLIC as a system controller
Used components:
Q1 Light Bulb H1
„
I1 Switch B1
„
I2 Infrared presence sensor
„
Light Bulb
1F Switch 2F Switch
- English -
Application Examples
Light Bulb Light Bulb
3F Switch
CLIC-02 | 199