External Remote Control; External Printer (A4) - Orbitalum ORBIMAT 300 SW Traduccion Del Manual De Instrucciones Originales

EnGLISH
Selecting a TIG manual welding torch
CAUTION: Programming via "Auto programming" not possible!
1. In the main menu, select "Manual/Adjust programming" > "Parameter adjustments" > "Basic adjustments".
2. Select and highlight the "Weld head model" field.
The list of weld head models appears in the display:
Abb. 18: Manual torch selection
8.8.4

External remote control

Connecting a remote control
1. Remove the dummy plug in the remote control connection of the machine.
2. Connect the remote control.
Abb. 19: Remote control
8.8.5

External printer (A4)

USB connection: Can be selected freely on the rear of the machine.
Internal printer driver/character set: PCL 3
126
orbitalum tools GmbH, D-78224 Singen, www.orbitalum.com, Phone +49 (0) 77 31 792-0
The connected manual torch is detected automatically.
3. If the manual torch is not detected:
Select weld head model from the list and save it.
4. Press softkey 1 ("Weld").
The machine is ready to start.
1. EMERGENCY-STOP switch
2. Function keys
1
ORBIMAT 300 SW
(14.01.21) OW_ORBIMAT_300SW_BA_852060202_00_EN