Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ORBIMAT 300 SW
X "Yes"
= Selected directories and/or files are deleted.
X "No"
= Selected directories and/or files are not deleted. The selection is retained.
X "Cancel"
= Selected directories and/or files are not deleted. The selection is cancelled.
Abb. 21:
Deleting a procedure
The system always saves logs on the external memory. The system-based required procedure "De-
fault" and the folder "Default" cannot be deleted.
Copying data
Abb. 22:
Managing a procedure
The message "Really copy the selected files?" is displayed.
All the selected files and the new storage location are listed.
X "Yes"
= Process is executed. The files are copied.
X "No"
= Process is not executed. The selection is retained.
X "Cancel"
= Process is not executed. The selection is removed.
Moving data
1. In the main menu select the "Program Manager".
2. Press softkey 2 "Manage".
3. Navigate to the desired directory or the desired file and mark it by pressing the rotary knob.
4. Use the rotary knob to navigate to the desired target directory.
5. Press softkey 2 "Move".
(14.01.21) OW_ORBIMAT_300SW_BA _852060202_00_EN
1. In the main menu select the "Program Manager".
2. Press softkey 2 "Manage".
3. Mark the file to be copied.
4. Use the rotary knob to navigate to the desired target
directory.
5. Mark either the complete folder or a file in the folder.
6. Press softkey 1.
ORBITALUM TOOLS GMBH, D-78224 SINGEN, W W W.ORBITALUM.COM, PHONE +49 (0) 77 31 792-0 129
EnGLISH
Publicidad
Tabla de contenido
Solución de problemas
