Storage And Transport; Gross Weight; Preparing Storage - Orbitalum ORBIMAT 300 SW Traduccion Del Manual De Instrucciones Originales

ORBIMAT 300 SW
6.

STORAGE AND TRANSPORT

6.1

Gross weight

ARTICLE
ORBIMAT 300 SW
* incl. transport packaging
Damage of electronic components with personal harm and damage to property.
WARNING!
If coolant is still located in the machine during transportation, coolant can enter from the tank into
the machine interior if tilted strongly.
X Pump out coolant before transporting.
Danger of injury through high weight of the orbital welding power supply!
WARNING!
The orbital welding power supply has a weight of 40.0 kg (88.18 lbs).
X Always lift the orbital weld head with two persons or use a suitable means of transport.
X When lifting the machine do not exceed the permissible total weight of 25 kg for men and 15 kg
for women.
6.2

Preparing storage

Carry out the following steps before storage:
X If the machine will be unused for a longer period of time, dismantle the machine and store it in a suitable place.
X Recommendation: Carry out the following activities before storage:
1. Clean the machine.
2. Remove the weld head from the orbital welding power supply. For procedure see operating instructions of weld head.
Storage conditions
• Relative humidity
• Temperature range:
(14.01.21) OW_ORBIMAT_300SW_BA _852060202_00_EN
WEIGHT*
[kg] 40
[lbs] 88.18
<70%
-20 ... +40 °C, protected from dust
ORBITALUM TOOLS GMBH, D-78224 SINGEN, W W W.ORBITALUM.COM, PHONE +49 (0) 77 31 792-0
EnGLISH
97