Aventics CANopen Instrucciones De Servicio página 133

1
2
Fig. 14: Mounting input/output modules on the VS HF03 LG or the VS HF04, example
1 Hexagonal socket-head screws
2 E end plate
3 Seal
4 Output module
AVENTICS | CANopen | R412005742–BDL–001–AD
6
3
4
3
A maximum of 6 modules (input or output) may be mounted
on one valve system. Observe the permissible current load.
See Fig. 14 on page 133.
1. Unscrew the E end plate (2) from the bus coupler (7) or from
the last input (5) or output module (4) of the valve system
(2 hexagonal head-socket screws DIN 912 – M4 (1), wrench
size 3) and remove it from the tie rods (6).
7
6
3
5
5 Input modules
6 Tie rod
7 Bus coupler
133
Disassembly/Exchange