Safety Instructions Related To The Product And Technology - Aventics CANopen Instrucciones De Servicio

94 AVENTICS | CANopen | R412005742–BDL–001–AD
For your safety
During assembly
Comply with the technical data and ambient conditions
W
listed in the product documentation.
If unsuitable products are installed or used in safety-
W
relevant applications, this may result in unintended system
operating states that may lead to injuries and/or equipment
damage. Therefore, only use a product in safety-relevant
applications if such use is specifically stated and permitted
in the product documentation.
You may only commission the product if you have
W
determined that the end product (such as a machine or
system) in which the AVENTICS products are installed
meets the country-specific provisions, safety regulations,
and standards for the specific application.
2.6 Safety instructions related to the product
and technology
Do not place any mechanical loads on the device under any
W
circumstances. Do not place any objects on it.
Ensure that the power supply is within the stipulated
W
tolerance for the modules.
Observe the safety notes found in your valve system's
W
operating instructions.
A 24 V power pack supplies all components with electricity.
W
The power pack must be fitted with a safe isolation in
accordance with DIN EN 60742, VDE 0551 classification.
This ensures that the electric circuits comply with SELV/
PELV electric circuits in accordance with IEC 60364-4-41.
Switch off the operating voltage before connecting or
W
disconnecting plugs.
The warranty only applies to the delivered configuration.
W
The warranty will not apply if the system is incorrectly
assembled or manipulated.
Make sure the relevant system component is not under
W
pressure or voltage before assembly or disassembly.
Ensure that the system is prevented from power restoration
during assembly work.