Input/Output Modules; Input Modules - Aventics CANopen Instrucciones De Servicio

100 AVENTICS | CANopen | R412005742–BDL–001–AD
Device description
Number of
connectable modules
Fig. 3: 8x input module RMV04-8DI_M8 (left) and RMV04-8DI_M12 (right)
1 Label
2 RMV04-8DI_M8 (left): 8 inputs on 8x M8 sockets
RMV04-8DI_M12 (right): 8 inputs on 4x M12 sockets
3 1 LED (yellow, status) for each input
1)
For plug assignment see page 105.
5.2.2

Input/output modules

The input/output modules with releasable plug connections
allow electrical input signals to be output via the valve system's
bus connection.
Input as well as output modules can be connected to the valve
system with bus coupler in any combination not exceeding
6 modules in total. Any order may be used.
Make sure to stay within the load limits.
O
The bus coupler supplies the inputs for the input modules. The
maximum total current for all inputs is 0.7 A.
The output module is supplied via an M12 connection, with one
power supply each for 4 outputs (M8) (see Tab. 6 on page 107).
5.2.3

Input modules

The input modules used to connect electric sensor signals are
available in two versions:
8x M8 (RMV04-8DI_M8) or
W
4x M12, double-assigned (RMV04-8DI_M12)
W
3
1 2
1)
1)