Honda Motor BF40D Manual Del Usuario página 322

1
[1]
3.5 mm TUBE CLIP
2
INSTALLATION: P. 2-86
3
4
5
6
7
[7]
8
PROTECTION TUBE
9
[8]
10
FUEL TUBE CLAMP B
Install between the protection
11
tubes on the breather tube B
with the opening toward up.
12
13
[7]
PROTECTION
14
TUBE
15
16
[5]
PAINT MARK
17
18
[6]
19
TUBE CLAMP 7.5-11.5
• Set the tube clamp with the opening toward out.
20
Set the pressure regulator control tube in the
smaller diameter side of the tube clamp and set
the breather tube B in the larger diameter side to
clamp.
• Install the tube clamp aligning its left end with
the paint mark on the pressure regulator control
tube and align the tube clamp with the end of the
protection tube on the breather tube B.
2-87
[2]
PRESSURE REGULATOR
CONTROL TUBE
[5]
PAINT MARK
322
[3]
BREATHER TUBE B
Insert the breather tube
up to the paint mark into
the silencer.
[4]
SILENCER