Gas Assisted Damper [Gas Assisted Type Only]; Tilt-Up Load Is Heavy; Gas Assisted Damper Does Not Hold In Position - Honda Motor BF40D Manual Del Usuario

e. GAS ASSISTED DAMPER [GAS ASSISTED TYPE ONLY]

• TILT-UP LOAD IS HEAVY

Check the damper stick.
Is it stuck from corrosion?
Not stuck
Replace the gas assisted damper assembly
(P. 14-54).

• GAS ASSISTED DAMPER DOES NOT HOLD IN POSITION

Check the tilt lever position.
"LOCK"
Replace the gas assisted damper assembly
(P. 14-54).
2-49
Stuck
Replace the damper stick.
"FREE" Move the tilt lever to the "LOCK" position.
86