Honda Motor BF40D Manual Del Usuario página 748

5) Remove the four 6 x 50 mm flange bolts, and remove the
throttle body and throttle body gasket.
Replace the throttle body gasket with a new one.
• INTAKE MANIFOLD ASSEMBLY
WARNING
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling fuel.
• Keep heat, sparks and flame away.
• Wipe up spills immediately.
• Handle fuel only outdoors.
1) Remove the engine cover (P. 4-2).
2) Relieve the fuel pressure according to "How to Relieve Fuel
Pressure" (P. 5-79).
3) Disconnect the fuel hose (P. 5-86).
4) Disconnect the IAT sensor 2P connector, TP sensor 3P
connector and the breather tube.
5) Disconnect the throttle rod from the throttle body.
5-90
[1]
THROTTLE BODY GASKET
[2]
THROTTLE BODY
[1]
TP SENSOR 3P
CONNECTOR
[2]
THROTTLE ROD
748
6 x 50 (4)
[2]
BREATHER TUBE
[3]
IAT SENSOR 2P
CONNECTOR
[1]
THROTTLE
BODY