Honda Motor BF40D Manual Del Usuario página 362

2) Remove the fuel strainer [low pressure side] from the fuel
strainer stay.
1
3) Disconnect the fuel tube A and the fuel tube B from the fuel
strainer [low pressure side].
2
4) Remove the strainer suspension from the fuel strainer [low
pressure side].
3
4
5
6
7
8
9
10
11
12
5) Remove the cup from the strainer body by attaching a
13
wrench or equivalent tool to the hex part of the strainer
cup.
14
6) Remove the filter from the strainer body, and remove the
15
19.5 x 1.5 mm O-ring.
Remove the O-ring with a new one on reassembly.
16
7) Check the filter for contamination, blockage with foreign
material or tears. Replace the element with a new one if
17
necessary.
18
8) Remove the 32.2 x 2 mm O-ring and the float ring from the
strainer cup.
19
Replace the 32.2 x 2 mm O-ring with a new one on
reassembly.
20
9) Remove water and foreign material from the strainer cup
and clean the cup.
3-14
[2]
[1]
STRAINER
FUEL STRAINER
SUSPENSION
[LOW PRESSURE
SIDE]
[1]
STRAINER
BODY
[2]
32.2 x 2 mm
O-RING
[3]
19.5 x 1.5 mm
O-RING
[4]
FILTER
[5]
FLOAT RING
[6]
STRAINER
CUP
[7]
HEX PART
362
[3]
FUEL STRAINER
STAY
[4]
FUEL TUBE B
[5]
FUEL TUBE A