Engine Cover - Honda Motor BF40D Manual Del Usuario

1. ENGINE COVER

1 a. REMOVAL
Unlock the locks on the front and rear of the engine cover, and remove the engine cover.
2
3
4
5
6
7
8
9
10
11
12
b. RENOVATION
13
1) Check the engine cover seal for damage or cracks. Remove
the engine cover seal from the engine cover and replace it
14
with a new one if necessary.
15
2) Apply the glue (LOCTITE
cover seal at the points shown.
16
3) Install the engine cover seal on the engine cover.
17
c. INSTALLATION
Install the engine cover on the outboard motor, and lock the
18
engine cover on the front and rear sides.
19
20
4-2
[1]
ENGINE COVER
® 460 or equivalent) to the engine
[2]
ENGINE COVER SEAL
[1]
GLUE [LOCTITE ® 460 OR EQUIVALENT]
APPLICATION POINTS (OUTER SURFACE)
[5]
OUTER SIDE
[4]
ENGINE COVER
SEAL
392
[2]
ENGINE
COVER
[3]
INNER SIDE