Honda Motor BF40D Manual Del Usuario página 756

c. INSTALLATION
• SILENCER/THROTTLE BODY
1) Install the new throttle body gasket on the intake manifold.
2) Set the throttle body and loosely tighten the four 6 x 50 mm
flange bolts.
3) Tighten the four 6 x 50 mm flange bolts in several steps to
the specified torque in the numbered sequence shown.
TORQUE: 12 N . m (1.2 kgf . m, 9 lbf . ft)
4) Set the silencer on the throttle body.
5-94
[2]
THROTTLE BODY
[2]
THROTTLE BODY
756
[1]
THROTTLE BODY GASKET
6 x 50 (4)
[1]
SILENCER