Publicidad
5) Apply marine grease to the water tube end.
Install the extension case on the outboard motor aligning
the water tube with the extension case grommet.
1
6) Tighten the ten 8 x 35 mm hex bolts to the specified torque.
2
TORQUE: 22 N . m (2.2 kgf . m, 16 lbf . ft)
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
7) Install the exhaust pipe grommet on the exhaust pipe
grommet holder [Long/semi-long/extra-long shaft types
18
only].
19
8) Install the exhaust pipe grommet holder assembly on the
exhaust pipe, and tighten the two 6 x 20 mm flange bolts
20
securely [Long/semi-long/extra-long shaft types only].
11-53
[1]
WATER TUBE
[2]
(MARINE GREASE)
[3]
EXTENSION CASE
GROMMET
[4]
EXTENSION
CASE
[5]
8 mm WASHER (10)
[6]
8 x 35 mm HEX
BOLT (10)
[1]
EXHAUST PIPE
[2]
EXHAUST PIPE
GROMMET
[3]
EXHAUST PIPE
GROMMET HOLDER
6 x 20 (2)
326
Publicidad
Capítulos
