Publicidad
c. REASSEMBLY
1) Apply soapy water to the outer surface of a new 7 mm
water seal.
1
2) Install the 7 mm water seal in the seal holder.
2
3) After installing the water seal, apply marine grease to the
seal lip.
3
4) Install the new 47 x 3.1 mm O-ring on the seal holder.
4
5
6
7
8
9
10
11
12
5) Install the seal holder on the shift rod B.
13
6) Set the push rod on the shift rod B, and align the hole in the
14
push rod with the hole in the shift rod B. Drive the 3 x 14.8
mm roller into the push rod using a commercially available
15
pin driver to install the push rod on the shift rod B securely.
16
17
18
19
20
11-24
[1]
7 mm WATER
SEAL
[4]
SEAL HOLDER
[4]
SEAL HOLDER
[3]
PUSH ROD
268
[2] (Apply marine grease
to the water seal lip.)
[3]
47 x 3.1 mm O-RING
[1]
SHIFT ROD B
[2]
3 x 14.8 mm
ROLLER
Publicidad
Capítulos
