Honda BF40D Manual De Instrucciones página 510

b. DISASSEMBLY
1) Remove the three 5 x 20 mm screws, and remove the yoke
and the O-ring.
1
Replace the O-ring with a new one on reassembly.
2
3
4
5
6
7
8
9
10
11
12
2) Remove the armature, and remove the brush springs.
13
3) Remove the 4 x 12 mm screw, and remove the brush
14
assembly.
15
4) Disconnect the terminal wire (blue wire) from the breaker
assembly.
16 Remove the 4 x 12 mm screw, and remove the breaker
assembly.
17
5) Check the oil seal for damage and replace it with a new one
if necessary.
18
Remove the oil seal.
Replace the oil seal with a new one on reassembly.
19
20
14-46
[1] YOKE
[2] 5 x 20 mm
SCREW (3)
[3]
FRONT BRACKET
ASSEMBLY
[4] ARMATURE
[3]
4 x 12 mm
SCREW (2)
[2]
BRUSH
ASSEMBLY
[1]
BRUSH
SPRING (2)
[8]
FRONT BRACKET
ASSEMBLY
510
[4] O-RING
[5]
TERMINAL
WIRE (BLUE
WIRE)
[6]
BREAKER
ASSEMBLY
[7]
OIL SEAL