Throttle Arm Bracket; Throttle Lever - Honda BF40D Manual De Instrucciones

2. THROTTLE ARM BRACKET

1 a. REMOVAL/INSTALLATION
1) Remove the throttle rod from the throttle lever.
2
2) Remove the intake manifold (P. 5-90).
3
3) Remove the remote control cable [throttle side] from the
throttle arm (P. 17-3).
4
4) Remove the two 6 x 14 mm flange bolts and remove the
throttle arm bracket assembly.
5
6
Installation is the reverse order of removal.
• Apply marine grease to the throttle rod installation part of the
7

throttle lever.

Perform the following adjustment.
8
- Throttle cable (P. 3-17)
9
10
11
12
13
14
15
16
17
18
19
20
6 x 14 (2)
17-8
[3]
THROTTLE ROD
[4]
THROTTLE ARM BRACKET
ASSEMBLY
DISASSEMBLY: P. 17-9
REASSEMBLY: P. 17-10
[1] THROTTLE LEVER
[3] THROTTLE ROD
[2]
(MARINE
GREASE)
652
[2]
(MARINE
GREASE)