Publicidad
25) Apply ATF to a new O-ring and install it on the free piston.
1
2
3
4
5
6
26) Apply ATF to a new O-ring and install it on the piston.
7
27) Apply ATF to the inner wall of the cylinder.
8
28) Install the free piston in the cylinder, and fill the free piston
with the ATF.
9
29) Install the piston rod comp. in the cylinder.
10
• Install the piston rod comp. by pushing the free piston in
with the end of the piston.
11
NOTICE
12
Install the piston rod comp. with care not to damage the
O-ring on the free piston and the O-ring on the piston rod.
13
30) Push the piston rod into the cylinder until the free piston
bottoms out.
14
15
16
17
18
19
31) Apply ATF to a new O-ring and install it on the bottom
piece.
20
14-25
(ATF)
[1] PISTON ROD COMP.
[2] PISTON
[3] O-RING
[4]
FREE
PISTON
[5]
CYLINDER
(ATF)
468
[1]
FREE
PISTON
[2] O-RING
(ATF)
[1] O-RING
[2] BOTTOM PIECE
Publicidad
Capítulos
