Publicidad
b. DISASSEMBLY
1) Remove the six 5 x 12 mm screws, and remove the under
cover from the tiller handle assembly.
1
2
3
4
5
6
7
8
9
10
11
12
2) Remove the grommet from the tiller handle assembly, and
13
remove the grommet from the two remote control cables.
14
3) Remove the two 4 mm E-rings from each of the two remote
control cables, and disconnect the remote control cables
15
from the throttle arm and the shift frame.
16
4) Remove the two 6 x 12 mm bolt washer and remove the
cable bracket and clamp bracket.
17
18
19
20
16-9
[2]
5 x 12 mm SCREW (6)
[1]
UNDER COVER
[1]
CABLE BRACKET
[9]
CLAMP BRACKET
[8]
THROTTLE
ARM
[7]
SHIFT FRAME
[6]
4 mm E-RING (2)
[5]
REMOTE CONTROL
CABLE [SHIFT SIDE]
576
[2]
6 x 12 mm BOLT
WASHER (2)
[3]
GROMMET
[4]
REMOTE CONTROL
CABLE [THROTTLE
SIDE]
Publicidad
Capítulos
