Honda BF40D Manual De Instrucciones página 46

11) Install the timing belt on the timing pulley side first, then on
the pulser rotor side.
1
• Install the timing belt with care not to bring the marks on
the pulser rotor and on the timing mark out of alignment.
2
12) Loosen the 10 x 38 mm flange bolt of the timing belt
tensioner.
3
• Do not tighten the 10 x 38 mm flange bolt.
4
5
6
7
8
9
10
11
12
13) Install the special tool on the crankshaft.
13
TOOL:
14
Crankshaft holder
15
14) Turn the crankshaft 2 turns counterclockwise using the
alignment mark on the pulser rotor as the reference point.
16
NOTICE
Do not turn the crankshaft clockwise.
17
18
19
20
7-15
[1]
TIMING BELT
[4]
TIMING PULLEY
[1]
CRANKSHAFT HOLDER
070PB-ZZ50100
070PB-ZZ50100
[3]
PULSER ROTOR
46
[2]
PULSER ROTOR
10 x 38
[3]
TIMING BELT TENSIONER
[2]
CRANKSHAFT