Publicidad
30) Connect the alternator stator 3P connector and install the
connector on the connector bracket B.
1
2
3
4
5
6
31) Connect the two CKP sensor 3P connectors.
7
8
9
10
11
12
32) Clean the threaded part of the crankshaft where the 24 mm
13
special nut is installed and the part of the alternator rotor
where the 24 mm special nut will seat using a clean shop
14
towel.
15
33) Clean the tapered surface of the crankshaft using a clean
shop towel sprayed with the degreasing cleaning agent.
16
34) Apply engine oil to the threads and seat of the 24 mm
special nut.
17
18
19
20
7-20
[1]
CKP SENSOR 3P CONNECTOR (2)
[1]
: Wipe off dust thoroughly.
: Apply engine oil.
: Clean with degreasing cleaning agent.
[2]
ALTERNATOR
ROTOR
56
[1]
CONNECTOR
BRACKET B
[2]
ALTERNATOR STATOR
3P CONNECTOR
[3]
24 mm
SPECIAL NUT
[4]
CRANKSHAFT
Publicidad
Capítulos
