Honda BF40D Manual De Instrucciones página 406

17) Set the 10 x 158 mm hex bolt and the 10 mm washer as
shown, and loosely tighten a new 10 mm self-locking nut.
18) Loosely tighten a new 7/8-14 UNF self-locking nut.
19) Install the rim angle sensor as shown, and tighten the 6 x
20 mm flange bolts securely.
13-30
[1]
10 x 158 mm
HEX BOLT
[2]
10 mm WASHER
[3]
10 mm SELF-
LOCKING NUT
[1]
L. STERN
BRACKET
[1]
TRIM ANGLE SENSOR
406
[2]
7/8-14 UNF SELF-
LOCKING NUT
6 x 20 (2)