Honda BF40D Manual De Instrucciones página 444

18) Drain the ATF (automatic transmission fluid) from the outer
tube by turning it slowly.
suitable container.
1
• Clean the threads of the outer tube.
2
Remove the O-ring from the outer tube using a sharp end
screwdriver.
3
Replace the O-ring with a new one on reassembly.
4
NOTICE
Take care not to damage the O-ring installation groove in
5
the outer tube.
6
7
8
9
10
11
12
19) Remove the bottom piece from the cylinder/piston rod
13
assembly.
14
• Clean the threads of the bottom piece.
15
Remove the O-ring from the bottom piece.
Replace the O-ring with a new one on reassembly.
16
17
18
19
20) Remove the piston rod and the free piston from the
cylinder.
20
Remove the O-rings from the piston rod and free piston.
Replace the O-rings with new ones on reassembly.
14-13
Catch the drained ATF in a
444
[2]
[1]
CYLINDER/PISTON
OUTER
ROD ASSEMBLY
TUBE
[3] O-RING
[1]
OUTER
TUBE
[1] BOTTOM PIECE
[2]
CYLINDER/PISTON
ROD ASSEMBLY
[3] O-RING
[1] O-RINGS
[4] FREE PISTON
[3] PISTON ROD
[2] CYLINDER