Publicidad
e. INSTALLATION
Raise the swivel case assembly to the uppermost position.
1) When the lower cylinder bushings have been removed from the gas assisted damper assembly, apply marine grease
1
to the new lower cylinder bushings and install them on the gas assisted damper assembly.
2
2) Apply marine grease to the outer surface of the 10 mm distance collar.
Install the 10 mm distance collar on the gas assisted damper assembly.
3
Raise the L. stern bracket, and install the 10 mm distance collar of the gas assisted damper assembly on the
4
L./R. stern brackets.
5
6
7
8
9
10
[1]
L. STERN BRACKET
11
12
13
[2]
R. STERN BRACKET
14
15
[3]
10 mm DISTANCE
16
COLLAR
17
[4]
LOWER CYLINDER
18
BUSHING (2)
19
20
14-59
[5]
(MARINE
GREASE)
[5]
(MARINE
GREASE)
536
[6]
GAS ASSISTED
DAMPER ASSEMBLY
Publicidad
Capítulos
