User Program (P 13) - Energetics E-204 Manual Del Usuario

User Program (P 13)

Features of this program
• The User Program allows you to design and store you own custom program
including load profile . Each one of the 10 time/resistance columns can be
selected and a load level set .
• You pre select the workout time, distance and the amount of calories to be
used .
• The computer calculates the optimum target heart rate based on your age.
This target heart rate is constantly displayed . Monitor your current heart rate
and adjust the load accordingly .
• The load can be controlled by adjusting the cadence or resistance.
S T O P P R O G R A M
T IME S P E E D D I S T CA L
K P H
Selection
Turn the selection button until PROGRAM 13 is displayed . Confirm your selec-
tion by pressing the selection button .
All manuals and user guides at all-guides.com
L E V E L
H EA R T R AT E
A G E
Settings
Workout time (TIME)/workout distance (DIST): After selecting
PROGRAM 13, TIME will blink . You can then choose to either set the workout
time or distance (DIST) . The computer will skip distance if a time
was entered . If no time is chosen the distance setting is activated .
• Turn the selection key until the desired workout time appears. Confirm your
selection by pressing the selection button .
Calories (CAL): After setting the workout time or distance, calories (CAL) will
blink on the display .
• Turn the selection button until the desired amount of calories to be burned
appears . Confirm your selection by pressing the selection button .
AGE: After selecting the calories to be burned, AGE will blink on the display .
• Turn the selection button until your age appears. Confirm your selection by
pressing the selection button .
Time/resistance columns (1 – 10): After entering your age, the display
moves to the control panel with the time/resistance columns . The first
column will blink .
• Turn the selection button until the desired load level appears. Confirm your
selection by pressing the selection button .
• The display moves to the second time/resistance column. Repeat the proce-
dure for all 10 time/resistance columns .
Begin your workout
When all settings are complete the program display will blink . Start the work
out by pressing the function key ST/SP .
The program will start with a resistance level of 6 for all time/resistance
columns .
If you set one segment at the highest level, than you can adjust the resist-
ance during the workout . If not, you can't adjust resistance .
EN